Speakers S-9

Latest news - S-9 will go through a major upgrade in 2010. Stay tune for the release of S-8 in May, 2010.

The technology behind the Nuforce S-9 speaker rests on the premise that true high-fidelity performance should be based on solid engineering principles that likewise strive to achieve the highest degree of value. In order to reach these goals, it became obvious that we would need to depart from traditional methodologies. The S-9 speaker, the result of a most productive collaboration with SP Technology Loudspeakers, Inc., is poisedto establish a new reference at a remarkably reasonable price.

Robert E. Greene, The Absolute Sound, USA

Before you even hear a sound, you know this one is something different...extraordinarily clean-sounding...play really loudly...ultra-pure sound...ability to reveal the details of sound expanding into ambient space is startling...have good bass extension...extreme top of the S9s takes off into the wild blue yonder...The S9s did well on the ultimate test, reproduced versus live music...really convincing in this nearly direct comparison with live music...convincing on large-scaled orchestral music like full orchestra as well...Voices were surprisingly realistic in their natural timbre and precise positioning, and people sounded like people...think about what live music really sounds like. I think you will come away as impressed as I did." - Feb 2007 Issue

Read about the unique design and construction of S-9:S-9 Brochure
Read about the technology behind S-9: Technical Paper

All speakers have three (3) year warranty.
Contact our sales department about auditioning S-9 if your dealer does not carry it.

S-9 Upgrade (07/20/2009) - A new tweeter and crossover upgrade has improved high frequency extension and tighter bass. Existing S-9 customers please contact Nuforce for the upgrade.

High-end Speaker Cable and External Crossover are included with the speaker.
This model is designed for 2-channel audio as well as LRC speakers in a home theater setup. Audio professionals (recording engineer, musicians) will find this speaker exceptionally accurate for use as monitor speaker.

Listening Impression

On first hearing, you will find the S-9 to be one of the "fastest" speakers you've ever heard. Attacks and decays are reproduced with extreme accuracy. The S-9s project many of the advantages of horns and electrostats while avoiding their problems.

On the one hand, they offer the speed and transparency the best electrostatics have to offer - without their dynamic limitations. On the other, they deliver the dynamic range we associate with horn speakers, but without their attendant nasality and "honkiness". Added to all of this is a level of soundstaging far superior to any horn speaker and better than many electrostatic designs. The NuForce S-9's imaging abilities rival the best mini-monitors on the market.

Harmonic textures and timbres will amaze you. And then there's the bass. Given the size of the speaker, it goes a lot lower than you would expect. While others claim low frequency response from small speakers, in practice they simply don't deliver. Whatever low bass they do produce is garbled by excessive distortion at anything but the most modest of playback levels. Not the S-9. The deep bass is powerful, tuneful and meticulously detailed.

Don't take our word for it. Listen for yourself.

• Frequency Response: 40 Hz to 25 kHz. +/- 2dB; -6db @ 33 Hz
• Low Frequency Tuning:Proprietary Hybrid Ported Reflex
• Low Frequency Attenuation Slope: 24 dB/Octave below 40 Hz.
• Phase Response: Less than 360 from 100 Hz - 20 kHz
• Group Delay Response: Less than 1mS DELAY SHIFT from 100 Hz - 20,000 Hz.
• Peak Power Handling: Greater than 1,000 WATTS (10mS)
• Short Term Maximum: 500 WATTS (I.E.C. 268-5)
• Power Handling: Long Term Maximum - 200 WATTS (I.E.C. 268-5)
• Sensitivity: 89 dB @ 2.83V /1M & 86dB @ 1 W/1M
• Impedance: 4-Ohms (nominal)
• Crossover: 4th order symmetrical, in-phase Linkwitz-Riley @ 1,250 Hz.
• Minimum Recommended: 50 WATTS RMS / Channel
• Amplifier Power: 200 - 750 WRMS @4ohm / Ch. preferred
• Low Frequency Drivers: 2 X 6.5¡¨ Aluminum Cone w/ center Phase Plug
• High Frequency Driver: Waveguide Loaded 1 Textile Dome - Ferrofluid Cooled
• Dimensions: 22.5" H X 9.0" W X 17.5" D

The platform to sit the speaker on should be a rectangle that's 6.75 inches wide by 16 inches deep. Recommended stand height: 24" to 26"

You can order custom made speaker stand from the following vendors:
Sound Anchors (www.soundanchors.com) part numbers:
3-Post Stand -- NFS9 (MSRP $400, order from Nuforce)
4-Post Stand -- NFS9S (MSRP $500, order from Nuforce)